Mold Base Automated Machining Standard system for mold base machining Using 2D drawings or 3D CAD models, simply define the machining shape. Depending on the 2D shape, pocket, contour, and hole machining are possible, and automatic tool selection and machining conditions are suggested by establishing a DB system for machining. And with one or two clicks, all NC data from drilling to roughing, finishing, and chamfering are automatically generated. The generated NC data is optimized through simulation.

How to use 2D CAM

  • Preparing for 2D CAM work

    Define the material and size of the stock and open 2D/3D drawing files (DXF, DWG)












  • Pocket design

    It is possible to create various types of processing pocket designs such as rectangular, polygon, circle, profile, taper angle, and corner R.











  • Select processing condition

    NCdata is automatically created at once by selecting the machining conditions such as drill (hole), roughing, semi-finishing, floor-bottom/wall/slope, corner, chamfer, and remaining cutting.

Product technology Machining technology of 2D CAM automation

  • New concept drill machining method

    Drilling has much more time for chip evacuation than machining time.
    NCBrain transforms the fixed Cycles G73 and G83, so that in a deep section that is more than three times the diameter of the drill, it goes down to G73 three times and rises up once, so that the machining operation is more than twice as fast.

  • Machining of Press Button Die

    If the button die was manually processed while checking the shape of the seat, NCBrain 2D CAM can recognize the position and shape of the drawing and automatically machining it with a relative depth.

Check the usage of the product

  • NCBrain 2D CAM DEMO

  • Drill machining