It differs depending on machine circumstance, but it can guarantee up to 1~2 Rz (μm) scallop height.
There is a difference in machining time, quality and tool life defending on the tool length and the flute.

D8R3 creates toolpath for the corner area as “R” and add toolpath. Product quality is improved.

Mirror-like finishing is impossible.

- It reduces the average tool cost more than 30% by machining to Tip of R-cutter for rough-residual, semi-finishing and 6 blades tool for finishing.
- When using holder tooling, machine life is increased due to no overload in rough machining of longer tool.

- AICAM E/M quality is equivalent to ‘good’ Among the best, good, fair, and poor.
- End mill prices is similar to existing standards.
- It maintains long life and accuracy by 4-5 times of tool Dia extruded.
- Grip force is 2 times of collet chuck.
- Broken tools within specified tool life in the table below will be replaced free of charge.
- 4M of HRC30 can guarantee 2 times longer tool life in the table below.

- Our products are 1/2 or 2/3 times cheaper than products of MST or HAIMER companies.
- It has high rigidity by 5 degree slope angle and 2.5~4 thickness than general tool makers(3”).
- It maintains longer life and more accuracy by the best cutting condition suitable for rigidity of shrink fit holder.
- It has higher accuracy and rigidity by all-in-one than 2piece chuck types.
- The guarantee of quality supplied

- First, it is absolutely necessary to use the fifteen(15) exclusive holders of AICAM because the machining parts is controlled by the size of the shrink fit holder.
- Yes, they can be used  between process of the essential fifteen(15) processing.
- Additional processing requires a little manual handling.

- Yes, you can use the other’s end mills if grinded to fit the standard value. 
- 6 blades and 0.5 corner radius tools can use and make as needed.



 

- It is because of CAM automation and unmanned CNC machining.
- To do so, the best combination S/W + H/W is necessary.
- Besides, it is absolutely necessary to use the fifteen(15) exclusive holders and tools of AICAM.